Axe
The
axe[Although ax is an accepted variant spelling in the United States, like archeology (as opposed to archaeology) it is rarely if ever used; axe appears first in dictionaries, and the variant would be considered odd by the average person.] is an ancient and ubiquitous
tool that has been used for
millennia to shape, split and cut wood,
harvest timber, as a
weapon and a
ceremonial or
heraldic symbol. The axe has many forms and specialized uses but generally consists of an axe head with a
handle, or helve.
The earliest examples of axes have heads of
stone with some form of wooden handle attached (hafted) in a method to suit the available materials and use. Axes made of
copper,
bronze,
iron and
steel appeared as these technologies developed.
Most modern axes have steel heads and wooden handles (typically
hickory) although
plastic or
fibreglass handles are not uncommon. Modern axes are specialized by use, size and form. Hafted axes with short handles designed for use with one hand are often called hand axes but the term hand axe refers to axes without handles as well.
Hatchets tend to be small hafted axes often with a
hammer on the back side.
|
A collection of old Australian axes |
Early stone tools like the
hand axe were probably not hafted. The first true hafted axes are known from the
Mesolithic period (ca.
6000 BC), where axes made from antler were used that continued to be utilized in the
Neolithic in some areas. Chopping tools made from
flint were hafted as
adzes.Axes made from ground stone are known since the Neolithic. They were used to fell
trees and for woodworking. Few wooden hafts have been found, but it seems that the axe was normally hafted by wedging.
Birch-tar and raw-
hide lashings were used to fix the blade. Since the late Neolithic (
Michelsberg culture,
Cortaillod culture) very small axe blades of a rectangular shape became common. They were hafted with an
antler sleeve. This prevented both the splitting of the haft and softened the impact on the stone blade itself.
The earlier Neolithic axe blades were made by first knapping and then grinding a stone. By late Neolithic times, sawing (wooden
saws and sand) became common. This allowed a more efficient use of the raw material. In
Scandinavia, Northern
Germany and
Poland axe blades made from knapped and polished
flint were common.
Stone axes are quite efficient tools; using one, it takes about 10 minutes to fell a
hardwood ash tree of 10 cm diameter, one to two hours for an ash of 30 cm diameter. (Modern comparison: 25 cm
softwood white pine, standing chop, under two minutes with a 3.5 kg competition felling axe.)
From the late Neolithic onwards (
Pfyn-Altheim cultures) flat axes were made of
copper or copper mixed with
Arsenic. Bronze axes are found since the early
Bronze Age (A2). The flat axe developed into
palstaves, flanged axes and later winged and socketed axes. The so-called "
Battle-axe people" of
3rd millennium BC Europe has been suggested to correspond to early
Proto-Indo-Europeans, ancestors of the later
Celtic and
Germanic tribes. Axes also were an important part in the Chinese weaponry.
The word for "axe" may have been
pelek'u- (
Greek pelekus πέλεκυς,
Sanskrit parashu, see also
Parashurama), but the word was probably a loan, or a neolithic
wanderwort, ultimately related to
Sumerian balag,
Akkadian pilaku- (see also
Labrys).
Late Neolithic 'axe
factories', where thousands of ground stone axes were roughed out are known from
Great Britain (for example
Great Langdale in
Cumbria),
Ireland (
Lambay Island,
Porphyry,
Rathlin Island and
Tievebulliagh, porcellanite) Poland (
Krzemionki,
flint),
France (
Plancher-les-Mines, Vosges,
pelite,
Plussulien,
Brittany, meta-
dolerite) and
Italy (Val de'Aoste,
omphacite. The distribution of stone axes is an important indication of
prehistoric trade.
thin sectioning is used to determine the provenance of ground stone axe blades.
Stone axes are still produced and in use today in parts of
Irian Jaya,
New Guinea. The
Mount Hagen area was an important production centre.
At least since the late Neolithic, elaborate axes (battle-axes, T-axes, etc.) had a
religious significance as well and probably indicated the exalted
status of their owner. Certain types almost never show traces of wear; deposits of unshafted axe blades from the middle Neolithic (such as Somerset Levels in Great Britain) may have been gifts to the .In Minoan Crete, the
double axe (labrys) had a special meaning. Double axes date back to the Neolithic as well. In
1998, a
double axe, complete with an elaborately embellished haft, has been found at Cham-Eslen,
Zug,
Switzerland. The haft was 120 cm long and wrapped in ornamented birch-bark. The axe blade is 17,4 cm long and made of
antigorite, mined in the
Gotthard-area. The haft goes through a biconical drilled hole and is fastened by wedges of antler and by birch-tar. It belongs to the early
Cortaillod culture.
In the
Roman fasces, the axe symbolized the
authority to
decapitate.
In
folklore, stone axes were sometimes believed to be
thunderbolts and were used to guard buildings against
lightning, as it was believed (
mythically) that
lightning never struck the same place twice. This has caused some skewing of axe distributions.
Steel axes were important in
superstition as well. A thrown axe could keep off a
hailstorm, sometimes an axe was placed in the
crops, with the cutting edge to the skies to protect the
harvest against bad
weather. An upright axe buried under the
sill of a house would keep off
witches, while an axe under the bed would assure
male offspring.
The axe is comprised of two primary components, the axe
head, and the
haft.
The
Axe Head is typically bounded by the
bit (or blade) at one end, and the
poll (or butt) at the other, though some designs feature two bits opposite each other. The top corner of the bit where the cutting edge begins is called the
toe, and the bottom corner is known as the
heel. Either side of the head is called the
cheek, which is sometimes supplemented by
lugs where the head meets the haft, and the hole where the haft is mounted is called the
eye. The part of the bit that descends below the rest of the axe-head is called the beard, and a
bearded axe is an antiquated axe head with an exaggerated beard that can sometimes extend the cutting edge twice the height of the rest of the head.
The
Axe Haft is sometimes called the handle. Traditionally, it was made of a resilient hardwood like hickory or ash, but modern axes often have hafts made of durable synthetic materials. Antique axes and their modern reproductions, like the
tomahawk, often had a simple, straight haft with a circular cross-section that wedged onto the axe-head without the aid of wedges or pins. Modern hafts are curved for better grip and to aid in the swinging motion, and are mounted securely to the head. The
shoulder is where the head mounts onto the haft, and this is either a long oval or rectangular cross-section of the haft that's secured to the axe head with small metal or wooden wedges. The
belly of the haft is the longest part, where it bows in gently, and the throat is where it curves sharply down into to the short
grip, just before end of the haft, which is known as the
knob.
Axes designed to cut or shape wood
*
Felling axe - Cuts across the grain of wood, as in the felling of trees. In single or double bit (the bit is the cutting edge of the head) forms and many different weights, shapes, handle types and cutting geometries to match the characteristics of the material being cut.
*
Splitting Axe - Used to split with the grain of the wood. Splitting axe bits are more wedge shaped. This shape causes the axe to rend the fibres of the wood apart, without having to cut through them, especially if the blow is delivered with a twisting action at impact.
*
Broad axe - Used with the grain of the wood in precision splitting. Broad axe bits are chisel-shaped (one flat and one bevelled edge) facilitating more controlled work.
Axes as weapons
*
Battle axe*
Hurlbat*
Throwing axe*
Frankish axe or
francisca*
Danish axe*
Tomahawk*
Halberd*
Pole axe*
ValaškaAxes for other uses
*
Firefighter's Axe, Fire Axe- Head has a pick-shaped pointed poll (area of the head opposite the cutting edge).
*
Pulaski, an axe with a
mattock blade built into the rear of the main axe blade, used for digging ('grubbing out') through and around roots as well as chopping. In addition to the
McCloud, (a tool similar to a hoe/rake combination) the pulaski is an indispensable tool used in fighting
forest fires, as well as trail-building, brush clearance and similar functions.
*
Mauls, splitting implements that have evolved from the simple 'wedge' design to more complex designs, some of which are mauls with a conical 'axehead' and compound mauls with swivelling 'sub-wedges', among other types; have a heavy wedge-shaped head, with a sledge-hammer face opposite.
|
Climbing axes from circa 1872 |
*
Climbing or Ice Axe -A number of different styles of
ice axe are designed for ice
climbing, and, though less used today than in previous times, for rock work, especially in enlarging steps used by climbers.
In the illustration to the right, from an
1872 "Art of Travel" publication, figure 1 represents a light axe or
pick which has the great advantage of lightness and handiness, with a single blade, or
adze, suited to step-cutting and with a small hammer-head at the back which balances the pick, and is useful in inserting pegs into rock and ice. Figure 2 represents a travellers' axe, slightly heavier than the first, and which, at least at the time, was recommended as adapted for mountain work of all kinds.
*
Battle axe*
Labrys*
Sagaris*
Francisca*
Fasces*
Battle axe people*
HatchetNeolithic axes
*W. Borkowski, Krzemionki mining complex (Warszawa 1995)
*P. Pétrequin, La hache de pierre: carrières vosgiennes et échanges de lames polies pendant le néolithique (5400 - 2100 av. J.-C.) (exposition musées d'Auxerre Musée d'Art et d'Histoire) (Paris, Ed. Errance, 1995).
*R. Bradley/M. Edmonds, Interpreting the axe trade: production and exchange in Neolithic Britain (1993).
*P. Pétrequin/A.M. Pétrequin, Écologie d'un outil: la hache de pierre en
Irian Jaya (Indonésie). CNRS Éditions, Mongr. du Centre Rech. Arch. 12 (Paris 1993).
Superstition
H. Bächtold-Stäubli, Handwörterbuch des deutschen Aberglaubens (Berlin, De Gruyter 1987).
*
Muller-Hammerwerk*
World of Axes*
Oxhead*
Hultafors*
Snow and Neally*
Council Tool*
Ames*
Peavy Maufacturing*
Vaughan Manufacturing*
Country Workshops*
Gransfors"An Axe to Grind" Practical axe manual[
1]
* Section about types of axes is based on a
Quicksilver Wiki article at [
2] under the terms of the
GNU Free Documentation License.
